Software Engineering for Embedded Systems (Wintersemester 2014/2015)
Dozent: Prof. Dr. Holger Giese
(Systemanalyse und Modellierung)
M.Sc. Sebastian Wätzoldt
(Systemanalyse und Modellierung)
Software-intensive systems, in which a considerable fraction of the system development efforts is dedicated to the development of embedded software, are often regarded as the most important software engineering field in the years to come. They are expected to be one key factor of success for many industries such as, for example, the automotive sector, transportation, or medical devices. As today technical systems also become connected to each other using network technology, we no longer only have technical systems which are controlled by isolated operating embedded software. Instead, the software may include complex information processing capabilities and the coordination between the different technical systems via networks taking hard real-time constraints into account.
Modeling embedded systems often results in a mix of models from a multitude of disciplines such as software engineering, control engineering, mechanical engineering, and electrical engineering. Block diagrams in systems engineering and the Unified Modeling Language (UML) in software engineering, are prominent examples of domain specific modeling techniques used for modeling. Recently, several steps towards integrating both worlds can be observed. UML component diagrams offer a system view which has been originally invented for complex real-time systems in the telecommunications domain. SysML suggests an extension of the UML for systems engineering. The required integration has to combine the usually continuous world considered by systems engineering and the discrete software engineering view and thus results in techniques for hybrid systems which support both continuous as well as discrete behavior.
Embedded systems are often safety-critical applications where their correct operation is vital to ensure the safety of the public and environment. Examples include shut-down systems for nuclear power plants, fly-by-wire aircrafts, autonomous train control software or anti-lock braking systems in automobiles. Safety is a system property and thus cannot be studied by simply taking into account the software part of an embedded system, only. However, in this lecture we will address the general engineering aspects of safety in a rather superficial manner and mainly concentrate on the specific problems of safety-critical systems which contain (complex) software parts.
In this lecture, we will review the current state of the art of software engineering for embedded systems taking into account the techniques available for the different development activities such as project management, requirements engineering, analysis & design, implementation, and verification & validation. This will, in particular, include the study of available techniques for the development of systems, which are safety-critical, have hard real-time constraints, and are hybrid systems. Also an overview about the current state of the art for the model-driven development of embedded systems is provided. In addition to the lecture exercises are organized to give an insight how to use state of the art approaches and tools. Within small projects the students can contribute the gained knowledge by developing solutions for the Robotino-Robot by using these introduced tools and concepts. The exercises and projects will be organized (partially) in the context of the Cyber-Physical-Systems-Laboratory (CPS-Lab) at the Hasso-Plattner-Institute.
The slides for the lectures will be published on the internal directory of the lecture. In addition, the following books, articles and reports are recommended:
 L. Carloni, M. D. D. Benedetto, R. Passerone, A. Pinto, and A. Sangiovanni-Vincentelli. Modeling Techniques, Programming Languages and Design Toolsets for Hybrid Systems. Project IST-2001-38314 COLUMBUS - Design of Embedded Controllers for Safety Critical Systems, WPHS: Hybrid System Modeling, July 2004. Version: 0.2, Deliverable number: DHS4-5-6.
 D. Henriksson, O. Redell, J. El-Khoury, M. Törngren, and K.-E. Arzen. Tools for Real-Time Control Systems Co-Design - A Survey. Technical Report ISRNLUTFD2/TFRT--7612--SE, Department of Automatic Control, Lund Institute of Technology, Sweden, April 2005.
 J. C. Laprie, editor. Dependability : basic concepts and terminology in English, French, German, Italian and Japanese [IFIP WG 10.4, Dependable Computing and Fault Tolerance], volume 5 of Dependable computing and fault tolerant systems. Springer Verlag, Wien, 1992.
 Nancy G. Leveson. Safeware: system safety and computers. Addison-Wesley, 1995.
 P. Liggesmeyer and D. Rombach, eds., Software Engineering eingebetteter Systeme: Grundlagen - Methodik - Anwendungen. Elsevier, 2005. (UPB Bib: TWQ 11163 +1)
 Peter G. Neumann. Computer related risks. ACM Press, 1995.
 Object Management Group. Systems Modeling Language (SysML) Specification, January 2005. Document: ad/05-01-03.
 Object Management Group. UML for System Engineering Request for Proposal, ad/03-03-41, March 2003.
 Object Management Group. UML 2.0 Superstructure Specification, October 2004. Document: ptc/04-10-02 (convenience document).
 T. Samad and G. Balas, eds., Software-Enabled Control: Information Technology for Dynamical Systems. IEEE Press and Wiley-Interscience, 2003.
 N. Storey. Safety-Critical Computer Systems. Addison-Wesley, 1996.
Lern- und Lehrformen
The lecture consists of two 90 minutes appointments per week. From mid of January, there is a practical project part instead of the readings. More information about the project will be given in the lecture.
In order to get accepted for the oral exam, the project and the exercises have to be successfully finished. Attendance of the lecture, projects and exercises is compulsory.
- Tuesday 9:15-10:45; A-2.1
- Wednesday 11:00-12:30; A-2.2
Exercises will be held instead or together with the lecture at the same locations and times
- 22.10.2014 Preparation Exercise 1
- 04.11.2014 Discussion Exercise 1 and Preperation Exercise 2
- 18.11.2014 Discussion Exercise 2
First exercise can be found in the material, shared folder.
The first introduction of the tools and projects will be on Tuesday, the 25th November.
A second introdcution of the project topics will be on 9th December.
Group building until 16th December.
Project start 06th January.
Project end 28th January.
Presentation of results 03rd/04th February.
- Semesterwochenstunden : 4
- ECTS : 6
- Benotet :
- Einschreibefrist : 24.10.2014
- Programm : IT-Systems Engineering MA
- Lehrform : VU
- Belegungsart : Wahlpflicht
- IT-Systems Engineering A
- IT-Systems Engineering B
- IT-Systems Engineering C
- IT-Systems Engineering D
- Software Architecture & Modeling Technology
- IT-Systems Engineering Analyse